About
This 47x175mm 3.6m green-treated C24 softwood is listed as regularised construction timber for UK building and carpentry projects. The specified planed faces and rounded or eased edges make it practical for setting out structural carcassing.
Typical applications include domestic floor framing, roof rafters, trimmers and other graded timber carcassing. The extra nominal depth compared with 47x150 does not remove the need to check deflection and span. These are examples of uses to consider, not a guarantee of suitability for every load or exposure condition.
The nominal section is 47x175mm; the current catalogue lists an approximate finished section of 45mm x 170mm. Nominal sizes and actual machined dimensions are not always the same. Different mills can have different tolerances, so check the confirmed supplied size before ordering close-fitting joist hangers, brackets or matched timber. Regularised timber offers a more consistent section than rough-sawn stock, but natural grain, knots and some movement are normal timber characteristics.
Can this C24 timber be used for joists or rafters? These are common applications of graded softwood, but the member size and span must be selected for the actual loads and support conditions. A longer stock length is not a certified unsupported span.
What does green-treated mean? It identifies the listed preservative treatment or appearance, not a guaranteed Use Class. An exposed external application, particularly ground contact or exterior structural support, can require Use Class 4 treatment. Confirm the treatment specification for your intended exposure. Protect freshly cut ends, notches and large drilled holes with a suitable end-grain preservative, and select fixings compatible with treated timber and the environment.
For quantity planning, divide the total running metres needed by 3.6m per piece, round up to whole lengths and allow for cutting waste. Store pieces off the ground on level supports, with suitable weather protection. Ask Simply Timber about availability and delivery across England if your project requires a particular mill specification.
Specifications
| True Thickness | 45mm |
| True Width | 170mm |
| Length | 3.6m |
| Structural Suitability | Yes |
| Grading / Standard | C24 (EN 338) |
| Face Finish | Planed |
| Edge Finish | Rounded |
| Preservative Treatment | Green Treated |
| Colour / Appearance | Green |