About
This 47x175mm 4.8m green-treated C24 softwood is listed as regularised construction timber for UK building and carpentry projects. The specified planed faces and rounded or eased edges make it practical for setting out structural carcassing.
Typical applications include domestic floor framing, roof rafters, trimmers and other graded timber carcassing. The extra nominal depth compared with 47x150 does not remove the need to check deflection and span. These are examples of uses to consider, not a guarantee of suitability for every load or exposure condition.
The nominal section is 47x175mm; the current catalogue lists an approximate finished section of 45mm x 170mm. Nominal sizes and actual machined dimensions are not always the same. Different mills can have different tolerances, so check the confirmed supplied size before ordering close-fitting joist hangers, brackets or matched timber. Regularised timber offers a more consistent section than rough-sawn stock, but natural grain, knots and some movement are normal timber characteristics.
Can this C24 timber be used for joists or rafters? These are common applications of graded softwood, but the member size and span must be selected for the actual loads and support conditions. A longer stock length is not a certified unsupported span.
What does green-treated mean? It identifies the listed preservative treatment or appearance, not a guaranteed Use Class. An exposed external application, particularly ground contact or exterior structural support, can require Use Class 4 treatment. Confirm the treatment specification for your intended exposure. Protect freshly cut ends, notches and large drilled holes with a suitable end-grain preservative, and select fixings compatible with treated timber and the environment.
Plan the cutting list before ordering 4.8m lengths, allowing for trimming, unavoidable offcuts and safe handling. Store the timber on level bearers, clear of the ground and protected from prolonged wetting. Check current availability and delivery arrangements across England before purchase.
Specifications
| True Thickness | 45mm |
| True Width | 170mm |
| Length | 4.8m |
| Structural Suitability | Yes |
| Grading / Standard | C24 (EN 338) |
| Face Finish | Planed |
| Edge Finish | Rounded |
| Preservative Treatment | Green Treated |
| Colour / Appearance | Green |