About
This 47x250mm 5.4m green-treated C24 softwood is listed as regularised construction timber for UK building and carpentry projects. The specified planed faces and rounded or eased edges make it practical for setting out structural carcassing. Its 5.4m stock length allows longer continuous runs or several shorter cut pieces from one length.
This nominal 47×250mm deep section is a large-section timber option commonly compared for floor, roof and structural framing projects. A deeper member is not automatically suitable for a given span: confirm the true finished size, loading, supports and compatible hangers or fixings against the design.
Typical applications include deep floor framing, roof carcassing, trimming and other longer or more heavily loaded timber members where specified. Where the proposed use approaches the limits of solid timber, have the design checked rather than assuming a long stock length gives a long clear span. These are examples of uses to consider, not a guarantee of suitability for every load or exposure condition.
The nominal section is 47x250mm; the current catalogue lists an approximate finished section of 45mm x 245mm. Nominal sizes and actual machined dimensions are not always the same. Different mills can have different tolerances, so check the confirmed supplied size before ordering close-fitting joist hangers, brackets or matched timber. Regularised timber offers a more consistent section than rough-sawn stock, but natural grain, knots and some movement are normal timber characteristics.
Will this deeper C24 section automatically span farther? Not without calculations. Span depends on loading, centre spacing, support, allowable deflection and the whole assembly. Use suitable span tables or project-specific structural advice rather than choosing by depth alone.
What does green-treated mean? It identifies the listed preservative treatment or appearance, not a guaranteed Use Class. An exposed external application, particularly ground contact or exterior structural support, can require Use Class 4 treatment. Confirm the treatment specification for your intended exposure. Protect freshly cut ends, notches and large drilled holes with a suitable end-grain preservative, and select fixings compatible with treated timber and the environment.
Plan the cutting list before ordering 5.4m lengths, allowing for trimming, unavoidable offcuts and safe handling. Store the timber on level bearers, clear of the ground and protected from prolonged wetting. Check current availability and delivery arrangements across England before purchase.
Specifications
| True Thickness | 45mm |
| True Width | 245mm |
| Length | 5.4m |
| Structural Suitability | Yes |
| Grading / Standard | C24 (EN 338) |
| Face Finish | Planed |
| Edge Finish | Rounded |
| Preservative Treatment | Green Treated |
| Colour / Appearance | Green |